Description

The CatX AVP Matrix 2×8 transmitter routes two VGA video sources over cat5 or cat6 cable, in any combination, to a maximum of eight displays, depending on the display resolution. Designed for ease of installation, this unit will broadcast VGA video and audio over cat6 UTP cable at 720p/1080i.

This product connects direct to the two VGA sources, there is no local VGA output on this device.

A built-in web interface facilitates the routing of the input and output settings and aslo provides diagnostic information.

The Ethernet interface only allows access from authenticed users (one administrator and many operators) and is securely protected against malicious attacks.

These units use a state of the art chip set thus ensuring compatibility and reliability.

Features

  • Two VGA sources to up to eight outputs
  • Input to output routing can be in any combination
  • Web interface controls VGA routing
  • Outputs selectable for AV or VP mode
  • EDID via DDC output to VGA source
  • Web interface for full diagnotic capabilities
  • 10Base-T and 100Base-TX Ethernet connectivity
  • User authentication control and secure protection
  • Future firmware updates via Ethernet port

Resolution / Distance

Note: The maximum resolution / distance values depend on the receiver type. Please refer to ‘Features’ page of the intended receiver.

Specification

Connectors and Controls

Video In 2 x HD15 male
UTP Out 8 x RJ45 (for CatX AVP receivers and repeaters only)
Audio Connectors 2 x 3.5mm analogue stereo audio in
Ethernet port 1 x RJ45 Ethernet for 10Base-T or 100Base-TX
Power Connector 1 x 1.3mm power jack

Video Specification

Video Levels RGB: 0.7V into 75R, HV: TTL compatible
Video Format VGA – UXGA compatible; 1080p compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported. Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz
Max. Distance 300m – see Resolution / Distance

Environmental and Physical Specifications

Temperature Operating: 0 – 40°C (32 – 104°F) – Storage: 0 – 55°C (32 – 131°F), 70% non-condensing RH maximum
Dimensions 70 mm x 160 mm x 28 mm – all metal enclosure
Weight CatX Matrix 2×8 : 390 g (?)

Downloads

Installation Manual available soon

Order Info

Product and Ordering Codes

Product Order Code  
CatX AVP Matrix 2×8 Transmitter CX-0W-AVP-2X8

Product Compatibility

The CatX AVP Matrix 2×8 Transmitter will operate with any CatX AV Range Receiver or Repeater.

Accessories

Product Order Code
5V USB power take-off 0.35 m P-USB-1.3-350
5V USB power take-off 0.70 m P-USB-1.3-700
5V PSU with 1.3mm DC plug for EU (Schuko) PS-5V1A-1.3-EU
5V PSU with 1.3mm DC plug for UK (3 pin) PS-5V1A-1.3-UK
5V PSU with 1.3mm DC plug for US (2 pin) PS-5V1A-1.3-US
Audio 3.5 mm stereo jack cable, 0.5 m CA3.5J-500S
SVGA M-F cable, 0.5m (high quality triple coax) CA-SVGA-MF-0.5
Rack mount kit MA-1U19-R2W
Wall mount kit MA-CXWB-W
DIN rail mount kit MA-CXDIN-W
Installation guide CatX AVP Tx4 / 8 manual