Description

These CatX Expanders receive a video signal from any CatX Video transmitter via UTP cable and provide a sharp high quality video at up to 150 m. The outputs of the CatX Expander can connect to any CatX Classic Range receiver.

These Expanders perform best using low cost cat5 cabling. Resolutions up to 2048 x 1536 are achievable depending on the length of UTP cable – see Resolution / Distance.

Features

  • Expands an existing system to provide more outputs
  • Can be located further from the VGA source where several cable runs are impractical
  • SVGA output over the maximum cable length
  • Simple to install and easy to use
  • Compact and lightweight
  • Cost effective solution
  • Rack and wall mount options available

Product Compatibility

These CatX Expanders are compatible with the following transmitters:

The outputs of the CatX Expanders are compatible with any receiver in the CatX Classic Range.

Resolution / Distance

Note: All distances in the following table quoted using a 60Hz refresh rate.

The maximum resolution possible is dependent on the CatX Video receiver connected to the CatX Expander. Please refer to ‘Features’ page of the intended receiver.

The following table applies to the UTP cable from the transmitter to the input of the Expander unit:

Max. Distance 150 m 150 m 100 m 40 m
PC Resolution 1024 x 768 1280 x 1024 1600 x 1200 2048 x 1536
HDTV Resolution 1280 x 720p 1368 x 768p 1920 x 1080p –

Specification

Connectors and Controls

UTP In RJ45 UTP connector
UTP Out 4 or 8 RJ45 UTP connectors
Power 12V 1.3mm DC socket

Video Specification

Video Format VGA – UXGA compatible 1080p compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported, Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz
Max. Resolution Dependent on length of UTP cable – see Resolution / Distance

Environmental and Physical Specifications

Temperature Operating: 0 – 40°C (32 – 104°F), Storage: 0 – 55°C (32 – 131°F), 70% non-condensing RH maximum
Dimensions WxLxH: 120 mm x 60 mm x 28 mm – all metal enclosure
Weight CatX Expander 4: 375g – CatX Expander 8: 390g

Downloads

  • Installation guide
  • Installation example
  • CatXQ Test Pattern

Related Information

Order Info

Product and Ordering Codes

Product Order Code  
CatX Expander 4 (includes CA3.5J-500S and 12V PSU**) CX-12W-EAV-T4
CatX Expander 8 (includes CA3.5J-500S and 12V PSU**) CX-12W-EAV-T8
  • Please specify PSU type required: EU, UK or US.

Product Compatibility

These CatX Expanders are compatible with the following transmitters:

The outputs of the CatX Expanders are compatible with any receiver in the CatX Classic Range.

Accessories

Product Order Code  
12V PSU with 1.3mm DC plug for EU (Schuko) PS-12V1.2A-1.3-EU
12V PSU with 1.3mm DC plug for UK (3 pin) PS-12V1.2A-1.3-UK
12V PSU with 1.3mm DC plug for US (2 pin) PS-12V1.2A-1.3-US
Rack mount kit MA-1U19-R2W
Wall mount it MA-CXWB-W
DIN rail mount kit MA-CXDIN-W
Installation guide CatX Expander 4 / 8 manual