CatX AVP Repeater 4/8
Description
The CatX AV Wall Plate transmitter provides a new solution for transmitting Audio+Video (AV) over a single cat5/6 UTP cable up to 300m. This unit also has DDC/EDID functionality, making operation and setup with any VGA display easy and straight forward. This unit can also be supplied in a variety of Wall plate finishes and formats to match other fittings.
This unit has very low power consumption (less than 0.3W). The transmitter connects to a VGA source using a VGA Male/Male cable. The unit can be powered by any DDC2B (or later) compliant VGA source, so no external PSU is required. This transmitter is video compatible with the CatX Mini and AVP range receivers and repeaters.
Features
- Designed to fit any single gang wall plate
- Low power – less than 0.3W
- Powered by any DDC2B (or later) compliant source
- Easy to Install
- EDID facility
- Transmits high resolution 1080p widescreen HDTV up to 120m
- Transmits VGA and Audio up to 300m
Product Compatibility
The CatX AV Wall Plate Tx will operate with any product in the CatX Mini and CatX AVP ranges, including the CatX AVP Repeaters.
Resolution / Distance
The maximum resolution possible is dependent on the type of CatX receiver that is connected to this transmitter
Specification
Connectors and Controls
| Wall Plate Transmitter | |
| Front Panel | |
| Video Input | HD15 Female |
| Audio Input | 3.5mm stereo jack socket |
| Status LED | Indicates Power/DDC function |
| Rear Panel | |
| Power | 1.3mm DC jack – 0.3W @ 5V DC (optional) |
| RJ45 Connector | Cat5/6 output |
Video Specification
| Video Levels | RGB: 0.7V into 75R, HV: TTL compatible |
| Video Format | VGA – UXGA compatible 1080p HD compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported. Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz |
| Max. Resolution | Dependent on type of receiver |
Environmental and Physical Specifications
| Temperature | Operating : 0 – 40°C (32 – 104°F) – Storage: 0 – 55°C (32 – 131°F), 70% non condensing RH maximum |
| Dimensions | To fit standard UK single Gang socket |
| Weight | 50 g (per unit) |
Downloads
- CatX AVP Brochure (2 MB)
- Wall Plate Tx Schematic (38 kB)
Product and Ordering Codes
| Product | Order Code | |
|---|---|---|
| CatX AV Wall Plate Tx | CX-WP0-AV-T | |
Product Compatibility
The CatX AV Wall Plate Tx will operate with any product in the CatX Mini and CatX AVP ranges, including the CatX AVP Repeaters.
Accessories
| Product | Order Code | |
| Audio 3.5 mm stereo jack cable, 0.5 m | CA3.5J-500S | |
| SVGA M-M cable, 0.5m (high quality triple coax) | CA-SVGA-MM-0.5 | |
| Installation guide | AV Wall Plate Tx manual |