The AVP range of transmitters broadcast a single VGA video source with audio or power to 2, 4 or 8 receivers over Cat5 UTP cable up to 300m.
The AVP range is so called because it can either transmit Audio + Video or Video + Power to the receiver. This offers additional flexibility when planning a Digital Signage installation.
Individual transmitters may be daisy chained using the Local VGA output to increase the number of outputs. This ensures that output channels are not wasted and optimizes the number of transmitters required.
CatX Mini AV is the world’s first self-powered VGA cat5 extender providing a unique solution for broadcasting audio and video over cat5 UTP cable.
- Compact – CatX Mini units are similar size to a VGA connector.
- Low Cost – CatX Mini can eliminate the use of expensive VGA cables.
- Low Power – Only the CatX Mini AV Rx requires an external power supply.
- Easy Installation – The CatX Mini units fit directly to the VGA connector – Zero footprint
The CatX Mini AV Tx and CatX Mini AV Rx will operate with any product in the CatX Mini and CatX AVP ranges, including the CatX AVP Repeaters.
(more details)
CatX Mini VP is the world’s first self-powered VGA extender providing a unique solution for broadcasting video and power over cat5 UTP cable, requiring no PSU at either end.
- Compact – CatX Mini units are similar size to a VGA connector.
- Low Cost – The CatX Mini can eliminate the use of expensive VGA cables.
- Low Power – The CatX Mini VP units can operate without any external power supplies.
- Easy Installation – The CatX Mini units fit directly to the VGA connector – Zero footprint
The CatX Mini VP Tx and CatX Mini VP Rx will operate with any product in the CatX Mini and CatX AVP ranges, including the CatX AVP Repeaters.
(more details)
The CatX AVP Tx2 transmitter broadcasts VGA and audio signals to two separate receivers at distances of up to 300m each (600m span), using cat5 UTP cable.
This VGA cat5 extender can take its power directly from the VGA source, making installation very simple and straightforward. The maximum high resolution of 2048 x 1536 makes the CatX AVP Tx2 the best quality unit in this category.
With VP mode selected, the UTP outputs can power two CatX Mini VP Receivers.
The CatX AVP Tx2 transmitter has a local VGA output and two audio outputs. The local VGA output can directly power up a CatX Mini VP Transmitter.
This VGA cat5 extender can also cascade to increase the number of outputs available, providing maximum configuration flexibility.
(more details)
The CatX AVP Tx4 and CatX AVP Tx8 transmitters broadcast high quality VGA and audio signals to a maximum of four or eight separate receivers at distances of up to 300m over low cost cat5 UTP cabling.
The CatX AVP Tx4 and Tx8 transmitters extend VGA as well as analogue audio and provide four or eight sets of AV signal outputs to the receivers.
The Tx4 transmitter can take its power directly from the PC using a simple USB power take off lead, simplifying installation and reducing system cost.
The CatX AVP Tx4 and CatX AVP Tx8 transmitters can also directly power up CatX Mini VP Receivers, when selected to VP mode.
These VGA cat5 extenders can also cascade to increase the number of outputs available, providing maximum configuration flexibility. These transmitters also provide a local VGA and audio output.
(more details)
The CatX Repeater 4 and Repeater 8 connect via cat5 UTP cable after any transmitter in the CatX AVP Range or to a CatX Mini Tx. These Repeaters provide additional outputs where the available number of outputs at the transmitter is reaching its maximum capability.
The choice of Repeater unit means that the most cost effective solution for your requirement is possible. Easy to install and no software is required.
The CatX Repeaters will transmit to any product in the CatX Mini and CatX AVP ranges as well as other Repeaters.
(more details)
CatX AVP Range
