CatX AV Rx2
Description
The CatXQ AV Rx2 outputs two high quality videos to any two VGA video displays up to a continuous cable distance of 300 m.
This product also incorporates XSQ™ technology that will eliminate the cable skew effect, especially over longer distances of UTP cable.
CatXQ AV Rx2 can receive audio and video, or video only, up to 300 m. The maximum resolution of this CatX receiver is dependent on the length of UTP cable – see Resolution / Distance.
Each CatXQ AV Rx2 has a UTP output for daisy chaining to another receiver in the CatX AVP Range or the CatX Mini Range. Multiple receivers can connect in this way for distances up to 2000 m. The distance between each CatXQ AV Rx2 receiver is dependent on the receiver, but the total span can be up to 4000 m (2 x 2000 m) when using CatX AVP Tx2/4/8 units as the source transmitter.
An external 5VDC power supply is required for the CatXQ AV Rx2, which consumes less than 0.25Watts.
Features
- Dual Mode operation
- Low powered
- High quality VGA up to 300 m from the transmitter
- SVGA output up to 2048 x 1536
- Multiple receivers can daisy chain to achieve a span up to 4000 m (2 x 2000 m)
- Rack or wall mount options available
- Incorporates XSQ™ technology – optimum skew correction system
Product Compatibility
The CatXQ AV Rx2 is compatible with any transmitter in the CatX AVP Range, including the CatX AVP Repeaters, and the CatX Mini Range.
Resolution / Distance
Note: All distances in the following table quoted using a 60Hz refresh rate.
| Maximum Distance | 300 m | 300 m | 220 m | 100 m |
| PC Resolution | 1024 x 768 | 1280 x 1024 | 1600 x 1200 | 2048 x 1536 |
| HDTV Resolution | 1280 x 720p | 1368 x 768p | 1920 x 1080p | – |
Specification
Connectors and Controls
| Video Out | HD15 way Female |
| Audio Out | 3.5mm stereo audio jack socket |
| UTP In | RJ45 UTP connector |
| UTP Out | RJ45 UTP connector |
| Distance Control | Control to optimise display quality up to 300m |
| Skew Correction | Yes – two continuously adjustable controls, S and Q |
| Power | 5V 1.3mm DC socket |
Video Specification
| Video Levels | RGB: 0.7V into 75R, HV: TTL compatible |
| Video format | VGA – UXGA compatible 1080p compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported. Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz |
| Max. Resolution | Dependent on the length of UTP cable – see Resolution / Distance |
Environmental and Physical Specifications
| Temperature | Operating: 0 – 40°C (32 – 104°F), Storage: 0 – 55°C (32 – 131°F), 70% non-condensing RH maximum |
| Dimensions | WxLxH: 120mm x 60mm x 28mm – all metal enclosure |
| Weight | 255 g |
Downloads
- CatX AVP Range brochure (431 kB)
- Skew correction guide (199 kB)
- CatX AV Rx installation guide (169 kB)
Related Information
Order Info
Product and Ordering Codes
| Product | Order Code | |
|---|---|---|
| CatXQ AV Rx2 (includes CA3.5J-500S and 5V PSU**) | CX-0S-QAV-R2 |
- Please specify PSU type required: EU, UK or US.
Product Compatibility
The CatXQ AV Rx2 is compatible with any transmitter in the CatX AVP Range, including the CatX AVP Repeaters, and the CatX Mini Range.
Accessories
| Product | Order Codes | |
|---|---|---|
| 5V PSU with 1.3mm DC plug for EU (Schuko) | PS-5V1A-1.3-EU | |
| 5V PSU with 1.3mm DC plug for UK (3-pin) | PS-5V1A-1.3-UK | |
| 5V PSU with 1.3mm DC plug for US (2-pin) | PS-5V1A-1.3-US | |
| 3.5 mm Stereo audio cable | CA3.5J-500S | |
| 0.5m VGA cable | CA-VGA-MF-0.5 | |
| Rack mount kit | MA-1U19-R2S | |
| Wall mount kit | MA-CXWB-S | |
| DIN rail mount kit | MA-CXDIN-S | |
| Installation guide | CatXQ AV Rx2 manual |