CatX Mini VP
Description
The CatX AV Rx2 receiver outputs two audio and VGA signals to any VGA display device at distances of up to 150m. The maximum resolution of this CatX cat5 receiver is 2048 x 1536 – see Resolution / Distance.
The CatX AV Rx2 provides a sharp high quality video up to 150m, using low cost cat5 cabling.
Each CatX AV Rx2 has a UTP output that allows it to daisy chain to another CatX AV Rx2 receiver. Multiple receivers can connect in this way to achieve distances up to 1000m. These units can also be daisy chained with CatXQ AV Rx2, achieving much longer distances of up to 2000m in a chain.
An external power supply is required for the CatX AV Rx2, consuming less than 0.25W per output.
Features
- High quality VGA up to 150m (continuously adjustable)
- SVGA output up to 2048 x 1536
- Low power – consumes less than 0.4W
- Multiple receivers can daisy chain up to 1000m
- High quality metal case
Product Compatibility
- Compatible with all CatX AVP transmitters and CatX Mini transmitters
- Can also connect after any CatX AVP Repeater
- Daisy chain with: CatX AV Rx2, CatXQ AV Rx2 and all CatX Mini receivers
Resolution / Distance
Note: All distances in the following table quoted using a 60Hz refresh rate.
The maximum resolution possible is dependent on the cat5 UTP cable length:
| Maximum Distance | 150 m | 150 m | 100 m | 40 m |
| PC Resolution | 1024 x 768 | 1280 x 1024 | 1600 x 1200 | 2048 x 1536 |
| HDTV Resolution | 1280 x 720p | 1368 x 768p | 1920 x 1080p | – |
Specification
Connectors and Controls
| Video Out | 2 x HD15 female |
| Audio Out | 2 x 3.5mm stereo audio jack socket |
| UTP In | RJ45 UTP connector |
| UTP Out | RJ45 UTP connector (transmit up to 300m) |
| Distance Control | Continuous control for optimised display quality up to 150m |
| Power | 1.3mm DC socket – 0.4W @5V |
Video specification
| Video Levels | RGB: 0.7V into 75R, HV: TTL compatible |
| Video format | VGA – UXGA compatible; 1080p compatible, RGBHV, RGSB, YUV, Y/C, CVBS formats supported. Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz |
| Max. Resolution | Dependent on UTP cable length – see Resolution / Distance |
Environmental and Physical
| Temperature | Operating: 0 – 40°C (32 – 104°F), Storage: 0 – 55°C (32 – 131°F), 70% non-condensing RH maximum |
| Dimensions | WxLxH: 120 mm x 60 mm x 28 mm – all metal enclosure |
| Weight | 240 g |
Downloads
- CatX AV Rx installation guide (169 kB)
- CatX AV Rx2 Schematic (116 kB)
- CatX AVP Range brochure (431 kB)
Related Information
Order Info
Product and Ordering Codes
| Product | Order Code | |
|---|---|---|
| CatX AV Rx2 (includes 5V PSU**) | CX-0S-AV-R2 |
- Please specify PSU type required: EU, UK or US
Product Compatibility
- Compatible with all CatX AVP transmitters and CatX Mini transmitters
- Can also connect after any CatX AVP Repeater
- Daisy chain with: CatX AV Rx2, CatXQ AV Rx2 and all CatX Mini receivers
Accessories
| Product | Order Code | |
|---|---|---|
| 5V USB power take-off 0.35 m | P-USB-1.3-350 | |
| 5V USB power take-off 0.70 m | P-USB-1.3-700 | |
| 5V PSU with 1.3mm DC plug for EU (Schuko) | PS-5V1A-1.3-EU | |
| 5V PSU with 1.3mm DC plug for UK (3 pin) | PS-5V1A-1.3-UK | |
| 5V PSU with 1.3mm DC plug for US (2 pin) | PS-5V1A-1.3-US | |
| 5V Inline PSU with 1.3mm DC plug and IEC connectors for input / output | PS-5V2A-1.3-ILP | |
| Audio 3.5 mm stereo jack cable, 0.5 m | CA3.5J-500S | |
| SVGA M-F cable, 0.5m (high quality triple coax) | CA-SVGA-MF-0.5 | |
| Rack mount kit | MA-1U19-R2S | |
| Wall mount kit | MA-CXWB-S | |
| DIN rail mount kit | MA-CXDIN-S | |
| Installation guide | CatX AV Rx2 manual |