Description

The CatXQ Console Rx controls access to a PC or KVM switch remotely up to a distance of 300m when connected to a CatX Universal Tx or a CatX Universal Tx2. When the transmitter console is in use, the remote receiver will automatically switch off the VGA output to its screen, preventing an operator viewing any screen activity while an administrator is accessing the system from the transmitter console.

This product also incorporates XSQ™ technology that will eliminate the cable skew effect, especially over longer distances of UTP cable.

These KVM extenders include an audio link allowing the use of speakers and a microphone from either the Tx or the Rx unit.

There is no additional software requirement but the CatXQ Console Rx requires an external 5VDC PSU to operate.

All the CatXQ units in the KVM Range output SVGA up to 300 m, higher resolutions are achievable at shorter distances – see Resolution / Distance.

Features

  • SVGA Output up to 1600 x 1200
  • Incorporates XSQ™ technology
  • Local Console security
  • Local Console access for added flexibility
  • Local multimedia output
  • Completely hardware based – no additional software required
  • Compatible with enhanced keyboards and wheel mice
  • Compatible with all PS2 based Operating Systems
  • Rack and wall mount options available

Product Compatibility

The CatXQ Console Rx is fully compatible with the CatX Universal Tx or the CatX Universal Tx2.

Resolution / Distance

Note: All distances in the following table quoted using a 60Hz refresh rate.

The maximum resolution possible is dependent on the length of the cat5 UTP cable:

Maximum Distance 300 m 300 m 220 m 100 m
PC Resolution 1024 x 768 1280 x 1024 1600 x 1200 2048 x 1536
HDTV Resolution 1280 x 720p 1368 x 768p 1920 x 1080p –

Specification

Connectors and Controls

Video HD15 female
Audio In 3.5mm microphone jack socket
Audio Out 3.5mm stereo audio jack socket
UTP RJ45 UTP connector
Distance Control Continuously adjustable to optimise display quality up to 300m
Skew Correction Continuously adjustable to eliminate cable skew effects up to 300m
Power 5V DC 2.1mm DC socket
Keyboard & Mouse PS2 sockets – green for mouse, purple for keyboard

Video Specification

Video Levels RGB: 0.7V into 75R, HV: TTL compatible
Video Format VGA – UXGA compatible 1080p compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported. Separate or composite HV; Horizontal 15 – 135kHz; Vertical 25 – 150Hz
Max. Resolution Dependent on CatX KVM receiver – see Resolution / Distance.

Environmental and Physical Specifications

Temperature Operating: 0 – 40°C (32 – 104°F), Storage: 0 – 50°C (32 – 131°F), 70% non-condensing RH maximum
Dimensions WxLxH: 165mm x 70mm x 28mm – all metal enclosure
Weight 375 g

Downloads

  • Installation guide
  • Installation example
  • CatXQ Test Pattern

Order Info

Product and Ordering Codes

Product Order Code  
CatX AVP Tx2 (includes CA3.5J-300S and 5V PSU**) CX-0W-QPCV-R
  • Please specify PSU type required: EU, UK or US

Product Compatibility

The CatX Console Rx is fully compatible with the CatX Universal Tx or the CatX Universal Tx2.

Accessories

Product Order Code  
5V PSU with 2.1mm DC plug for EU (Schuko) PS-5V1A-2.1-EU
5V PSU with 2.1mm DC plug for UK (3 pin) PS-5V1A-2.1-UK
5V PSU with 2.1mm DC plug for US (2 pin) PS-5V1A-2.1-US
Audio 3.5 mm stereo jack cable, 0.5 m CA3.5J-500S
PS2 KVM cable, 2.4m CA-240-H
PS2 KVM + speaker and mic cable, 2.4m CA-240-HMM
SVGA M-F cable, 0.5m (high quality triple coax) CA-SVGA-MF-0.5
Rack mount kit MA-1U19-R2W
Wall mount kit MA-CXWB-W
DIN rail mount kit MA-CXDIN-W
Installation guide CatXQ Console Rx manual