HDMI TransmitterDescription

The CatX HDMI Tx4 units broadcast a sharp, high quality video and audio signal up to 90m using low cost cat6 cabling. Cat5e cable will also give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using quality HDMI cables up to 20m from the transmitter.

The CatX HDMI transmitter unit connects to any single Cat6 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. This CatX HDMI transmitter unit also incorporate an EDID facility and is HDCP 1.1 compliant for use with Blu-Ray and Satellite video sources.

Features

  • HDMI 1.3c and DVI 1.0 compliant
  • HDCP 1.1 compliant
  • Supports EDID
  • Automatic adjustment – no manual set up required
  • Low power consumption
  • Designed for 24/7 operation

Product Compatibility

The CatX HDMI Tx4 transmitter will operate with any single Cat6 extender in the CatX HDMI range.

Resolution / Distance

Note: All distances in the following table quoted using a 60Hz refresh rate. The maximum resolution possible is dependent on the length of cat6 UTP cable:

Maximum Distance – Cat6 90m 65m 50m
HDTV Resolution 576p 720p / 1080i 1080p

Specification

Connectors and Controls

Input Connectors 1x HDMI Type A
Output Connectors 4x RJ45

Video Specification

HDMI Compliance HDMI 1.3c
HDCP Compliant Yes
Video Support 480i / 480p / 576i / 576p / 720i / 720p / 1080i / 1080p up to 36-bit colour
Transmission over UTP (24-bit) Full HD: 720p / 1080i – 65m cat6

Environmental and Physical Specifications

Housing Wall mounting metal enclosure
Dimensions (WxLxH) 141 x 88 x 32mm
Power consumption Less than 2.5W max. (5V DC @ 0.5A)
Operating temperature 0 ~ +40°C (32 ~ 104°F)
Storage temperature -20 ~ +60°C (-4 ~ +140°F)
Relative Humidity 20 – 90% RH (non condensing)
Weight CatX HDMI Tx4: 340g

Downloads

HDMI Brochure
HDMI Brochure (2 MB)
HDMI Tx4 Manual-sy
HDMI Tx4 Manual-sy (641 kB)

Order Info

Product and Ordering Codes

Product Order Code
CatX HDMI Quad Transmitter CX-1HD3-T4

Product Compatibility

The CatX HDMI Tx4 will operate with any product in the CatX HDMI range.

Accessories

Product Order Code
HDMI cable (Type A to Type A) 0.5m CA-HDMI-0.5
HDMI cable (Type A to Type A) 1.0m CA-HDMI-1.0
HDMI-DVI cable (Type A to DVI) 0.5m CA-DVI-HDMI-0.5
HDMI-DVI Adapter P-DVI-HDMI
Rack mount kit suitable for up to 3 x CatX HDMI Tx4 units MA-1U19-HD3T4