Description
The CatX HDMI Tx units broadcast a sharp, high quality video and audio signal up to 90m using low cost Cat6 cabling. Cat5 cable will give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using any good quality HDMI cable up to 20m from the transmitter.
The CatX HDMI transmitter unit connects to any single cat5 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. Designed for commercial environments (24/7 reliability), CatX HDMI Tx will broadcast HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. This CatX HDMI transmitter unit also incorporate an EDID facility and is HDCP compliant for use with Blu-Ray and Satellite video sources.
Features
- HDMI 1.3c and DVI compliant
- HDCP compliant for use with Satellite and Blu-Ray systems
- Supports EDID
- Automatic adjustment – no manual set up required
- Low power consumption
- Designed for 24/7 operation
Product Compatibility
The CatX HDMI transmitter will operate with any single Cat5/6 extender in the CatX HDMI range.
Resolution / Distance
Note: All distances in the following table quoted using a 60Hz refresh rate. The maximum resolution possible is dependent on the length of cat6 UTP cable:
| Maximum Distance – Cat6 |
90m |
65m |
50m |
| HDTV Resolution |
576p |
720p / 1080i |
1080p |
Order Info
Product and Ordering Codes
| Product |
Order Code |
|
| CatX HDMI Transmitter + Local |
CX-0HD3-T |
|
Product Compatibility
This CatX HDMI Transmitter will operate with any product in the CatX HDMI range.
Accessories
HDMI Audio/Video Extenders
