Description

The CatX Video Tx2 is ideal for SVGA transmission over cat5 cable up to 300m when connected to either a CatXQ Video Rx or a CatXQ Video Rx2. The CatX Video Tx2 can save both space and money whilst increasing security to a much higher level, as the video source is no longer in the same location as the display.

The CatX Video Tx2 provides a sharp high quality video at up to 300m, performing best using low cost cat5 cabling. Higher resolutions are achievable at shorter distances – see Resolution / Distance.

The CatX Video Tx2 requires only a single 12V mains adapter in order to operate. The PSU attach to either the transmitter unit or the receiver unit(s), providing even more installation flexibility.

The CatX Video Tx2 is cascadable, allowing the creation of further outputs and greater flexibility in the design of an installation system.

Installation of all CatX units is quick and easy. With only a single distance compensation control on the CatX Video receiver unit, adjustments are simple to do whilst viewing the remote display. No switch settings or complicated set up procedure is required.

All CatX units have been styled with metal casing yet designed to be compact and lightweight. As such, they are easy to fit in environments with limited space.

Features

  • Single PSU connection
  • SVGA output at maximum distance
  • Simple to install and easy to use
  • Compact and lightweight
  • Cost effective solution
  • Cascadable to obtain more outputs
  • Rack and wall mount options available

Product Compatibility

The CatX Video Tx2 will operate with any receiver in the CatX Classic Range.

The Cascade feature allows the CatX Video Tx2 to connect to any other transmitter in the CatX Classic Range using a standard VGA extender cable.

Resolution / Distance

Note:The maximum resolution / distance values depend on the receiver type.  Please refer to ‘Features’ page of the intended receiver.

Specification

Connectors and Controls

Video In HD15 way Male
Video Out HD15 way Female
Audio In 3.5mm stereo audio jack socket
Audio Out 3.5mm stereo audio jack socket
UTP Out 2 x RJ45 UTP connector
Power 12V 1.3mm DC socket

Video Specification

Video Levels RGB: 0.7V into 75R, HV: TTL compatible
Video format 75 Ohms input/output VGA — UXGA compatible; 1080p compatible, RGBHV, RGSB, YUV, Y/C, CVBS formats supported, separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz
Max. Resolution Dependent on CatX Video receiver, see Resolution / Distance

Environmental and Physical Specifications

Temperature Operating: 0 – 50 °C, Storage: Operating: 0 – 55 °C, 70% non condensing RH maximum
Dimensions WxLxH: 120 mm x 60 mm x 28 mm – all metal enclosure
Weight 255 g

Downloads

To download the data sheet for this product click here

To download the Installation guide for this product click here

Related Information

Related Information

Order Info

Product Order Codes  
CatX Video Tx2 (includes CA3.5J-500S and 12V PSU**) CX-12S-LAV-T2
  • Please specify PSU type required: EU, UK or US.

Accessories

Product Order Codes  
12V PSU with 1.3mm DC plug for EU (Schuko) PS-12V1A-1.3-EU
12V PSU with 1.3mm DC plug for UK (3-pin) PS-12V1A-1.3-UK
12V PSU with 1.3mm DC plug for US (2-pin) PS-12V1A-1.3-US
3.5 mm Stereo Audio Cable, 0.5 m CA3.5J-500S
0.5m VGA Cable CA-VGA-MF-0.5
Rack mount kit MA-1U19-R2S
Wall mount kit MA-CXWB-S
DIN rail mount kit MA-CXDIN-S
Installation guide CatX Video Tx manual