CatXQ Video Rx (300m)
Description
The CatX Video Rx2 receiver outputs two high quality VGA video to two VGA display devices, with stereo audio, at distances up to 150m when connected to any transmitter in the CatX Classic Range. The tune control on the CatX Video Rx provides an easy adjustment to produce a sharp high quality video and performs best using low cost cat5 cabling – see Resolution / Distance.
Installation of all CatX units is quick and easy, requiring only a single 12VDC PSU adapter in order to operate. The PSU can attach to either the transmitter unit or the receiver unit, providing flexibility in the installation.
A single distance compensation control on the CatX Video Rx2 unit makes adjusting the image quality for different cable lengths simple whilst viewing the remote display. No switch settings or complicated set up procedure is required.
CatX Video Rx2 is compact and lightweight, saving both space and money whilst raising system security to a much higher level, since the video source is no longer in the same location as the display. This small size also allows for easy installation in environments with limited space.
The CatX Video Rx2 takes its power either from the transmitter or from a local PSU and consumes less than 0.25 Watts.
Features
- Low powered
- High quality VGA up to 150m
- SVGA output over the maximum cable length
- Rack and wall mount options available
Product Compatibility
The CatX Video Rx is compatible with any CatX Video transmitter in the CatX Class Range.
Resolution / Distance
Note: All distances in the following table quoted using a 60Hz refresh rate.
The maximum resolution possible is dependent on the length of the cat5 UTP cable:
| Maximum Distance | 150 m | 150 m | 100 m | 40 m |
| PC Resolution | 1024 x 768 | 1280 x 1024 | 1600 x 1200 | 2048 x 1536 |
| HDTV Resolution | 1280 x 720p | 1368 x 768p | 1920 x 1080p | – |
Specification
Connectors and Controls
| Video Out | HD15 female |
| Audio Out | 3.5mm stereo audio jack socket |
| UTP In | RJ45 UTP connector |
| Distance Control | Control to optimise display quality up to 150m |
| Power | 12V 1.3mm DC socket |
Video Specification
| Video Levels | RGB: 0.7V into 75R, HV: TTL compatible |
| Video Format | VGA – UXGA compatible 1080p compatible, RGBHV, RGSB, YUV, Y/C, and CVBS formats supported Separate or composite HV; Horizontal 15-135kHz; Vertical 25-150Hz |
| Max. Resolution | dependent on length of cat5 cable – see Resolution / Distance |
Environmental and Physical Specifications
| Temperature | Operating: 0 – 40°C (32 – 104°F), Storage: 0 – 55 °C (32 – 131°F), 70% non-condensing RH maximum |
| Dimensions | WxLxH: 120mm x 60mm x 28mm – All metal |
| Weight | 250 g |
Downloads
To download the data sheet for this product click here
To download the Installation guide for this product click here
Related Information
Order Info
| Product | Order Codes | |
|---|---|---|
| CatX Video Rx2 | CX-12S-RAV-R2 |
- Please specify PSU type required: EU, UK or US
Product Compatibility
The CatX Video Rx is compatible with any CatX Video transmitter in the CatX Class Range.
Accessories
| Product | Order Codes | |
|---|---|---|
| 12V PSU with 1.3mm DC plug for EU (Schuko) | PS-12V1.2A-1.3-EU | |
| 12V PSU with 1.3mm DC plug for UK (3-pin) | PS-12V1.2A-1.3-UK | |
| 12V PSU with 1.3mm DC plug for US (2-pin) | PS-12V1.2A-1.3-US | |
| 3.5 mm Stereo audio cable | CA3.5J-500S | |
| 0.5m VGA cable | CA-VGA-MF-0.5 | |
| Rack mount kit | MA-1U19-R2S | |
| Wall mount kit | MA-CXWB-S | |
| DIN rail mount kit | MA-CXDIN-S | |
| Installation guide | CatX Video Rx2 manual |